SOLENSY KIT 300 L | Solar Panels

High pressure tank (One Copper coil)

Vitrified with fixed double spiral exchanger Tank for solar systems for the production of hot water. The high thickness of the rigid polyurethane provides excellent thermal insulation of the water, minimizing the dispersion of heat.

serbatoi

Tank capacity	150L	200L	250L	300L	500L	750L	1000L	2000L
Inner Tank Diameter (mm)	360	450	450	550	750	850	1000	1000
Outer Casing Diameter (mm)	470	550	550	650	850	950	1100	1100
Overall tank height (mm)	1430	1450	1760	1460	1400	1300	1300	2600
Standard Ports	3/4"~2’ female BPP thread
Temperature Sensor Ports	8mm ID – total 80mm depth
Insulation Material	55mm polyurethane insulation
Inter Tank Material	2~4mm SUS304 Stainless steel or 316
Outer Tank Casing	0.5mm color steel (indoor use only)
Sacrificial Magnesium Anode	20mm*400mm
Heating elements port	Female thread
Tank Max Pressure Rating	6bar
P/T valve	6bar

Solar Collector

collettore esempio di impianto

MODEL	1800/58-18-C	1800/58-20-C	1800/58-24-C	1800/58-30-C
Surface	2.66 m2	2.99 m2	3.56 m2	4.42 m2
Vacuum tubes	18	20	24	30
Tube diameter	47 mm	47 mm	47 mm	47 mm
Tube length	1800 mm	1800 mm	1800 mm	1800 mm

Technical Specifications
Manifold Casing Material	304 Stainless Steel
Header Pipe Material	C12200 Copper
Insulation Material	Rock Wool
Rubber Seals and Rings	UV stabilized high temperature silicone rubber
Optimal installation angle	30-70° Vertical - 0° horizontal
Maximum Operation Pressure	6bar-85psi
Pressure Drop	700Pa @ 3.3L/min for 20 tube manifold (SRCC)
Optimal flow rate	0.1L/min/tubo-0.026G/min/tubo
Performance Data (SPF)	Conversion factor :ho=0.717
Loss Coefficients	a1=1.52, a2=0.0085

Vacuum tube

Solar collector SOLENSY has a high performance of efficiency due to the size of the vacuum tube and the considerable low heat reduction, thank to the vacuum technology. This allows for greater thermal performances even in less favorable seasons. The condenser HEAT-PIPE is totally wrapped by the collector using the "COPPER CUP", in this way improving the transmission of heat. The vacuum tubes type “bayonet” coupling allows the installation or replacement of those also with the system under pressure.

Model	1800/58
Weight	2.29±0.18kg
Structure	All glass coaxial double-layer tubes
Outer tube diameter	Ф58±0.7 mm
Inner tube diameter	Ф47±0.7 mm
Outer tube thickness	1.8±0.15 mm
Inner tube thickness	1.6±0.15 mm
Tube's length	1812±4 mm
Coating material	AlN/AIN-SS/CU
Absorptance	0.94~0.96
Emittance	0.04~0.06
Vacuum	P≤5×10-3pa
Transmittance of Outer tube	0.91
Stagnation temperature (heat)	270~300℃
Heat loss coefficient	≤0.6 w/ (m2*℃)
Pressure-endure ability	1MPa

certifications: certificazioni

Pump Station Solensy 116

Mechanical Features
Ambient temperature	0-50°C
System working pressure	8 bar
Max. self consumption	<3W
Externality size	450 mm x 310 mm x 150 mm
Voltage	AC 220V((optional AC 110V)
Provision Characteristics
Accuracy of temperature measuring	± 2 °C
Range of temperature measuring	0~150 °C
Power of controlled pumps	600W
Auxiliary heating power	± 3000W
Input signal: 6 temperature sensors	PT1000 for heat collector, NTC 10k B=3950 for water tank
Output signal: 5	1 auxiliary heating, 4 pumps or 3 pumps and 1 three way electromagnetic valve
System working pressure	8 bar and safety valve response pressure 6 bar

Roof Mounting kit	Mixing valve thermostatic

Check valve	Temperature and pressure relief valve

Retailers and Installers Area

High pressure tank (One Copper coil)

Solar Collector

Vacuum tube

Pump Station Solensy 116